This Master?s Thesis aims to illustrate in what ways the two Swedish Environmental assessment tools, the Environmental Load Profile and EcoEffect differ and if performed valuations gives different results and environmental goals.The built urban environment causes about half the environmental loading in Sweden. The society?s ambition towards sustainable development has resulted in demands reducing the environmental load. One way to accomplish this change is with the assistance of tools for environmental assessment of the built environment.

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different Environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

Assessment of the level of the pupils´ knowledge and understanding are important parts of teaching. There are diverse ways to do this and many different tools to use.The purpose of this study is to explore, through qualitative interviews, how five teachers work with assessment. The focus lies on both how they work with assessment in general and how they use the assessment tools called »LUS» and »Nya språket lyfter!». The pupils´ participation in their own education is an important part of the Swedish curriculum, which is why the study also focuses on how the informants work to enable the pupils´ participation in the assessment and in their education.The informants all think that both assessment and the pupils´ participation in the assessment are important, since teaching is easier when the pupils are aware of what they need to know and learn. Many of the informants express that time is an issue when it comes to making the assessment trustworthy.

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different Environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

The aim of my thesis was to do a Life Cycle Assessment (LCA) of an average thread tap that is manufactured by Dormer Tools AB, and to create a practical model that the company can use in order to study other thread taps from an environmental perspective.The method of LCA is used to investigate the environmental effects of a product during its life cycle. This is a gate-to-grave analysis with focus on steel and thread tap manufacturing, coating procedure, use, waste management and transports. Three common coating types were compared separately. Steel manufacturing answers for the highest energy and raw material consumption under the life cycle of the thread tap. Its emissions contribute to global warming, acidification and eutrophication above others.

In the last few years the environment becomes more watchful, even for us farmers. All agricultural enterprises that exceed 200 animal units must be tested according to regulation of environment. A farm business with 200 animal units and more is classed ?environmentally hazardous activities? and has to make an environmental impact assessment for the business you have today, and the activity after expansion. Before you can construct a building and expand the numbers of animals is a lot of applications to make. I have in this project restricted me to establish a environmental impact assessment and a consultation foundation. To make a environmental impact assessment is the big part of the application. The environmental impact assessment take a lot of time and you need skills for all the rules in the environmental code to be abele to make an environmental impact assessment approved. The environment codes purposes (1 kap 1 § Miljöbalken) is to rule the laws. The purpose of the environment code is to promote sustainable development which will assure a healthy and sound environment for present and future generations. Definitions of a ?environmentally hazardous activities? 9 kap 1§ Miljöbalken) shall mean the discharges of wastewater, solid matter or gas from land, buildings or structures onto land or into water areas or ground water.

In Sweden, detailed development plans (DDPs) go through a screening process to decide whether their implementation could cause significant environmental impact or not. The criteria in the legislation were studied to see if an environmental impact assessment was needed. This study also investigated 26 DDPs from 12 out of 13 of the municipalities in Östergötland and how they meet up to the demands in relevant legislation, for example the rules for Environmental Impact Assessments. Plans that concerned suburban communities and new housing were selected. The environmental issues highlighted in the plan documents were compared to selected topics from the GIS data base 'Östgötakartan' to see if the assessments made by the municipalities were reasonable judged.

Background: Patients postoperative pain is often underestimated. Untreated or undertreated pain decreases the chance of optimal recovery after surgery. Pain assessment is an important factor of efficient pain relief. Aim: The aim of the literature study was to describe factors of importance for nurses´ assessment of postoperative pain in patients. Method: A literature study was done where qualitative and one quantitative article was reviewed.

This paper describes the integration of environmental assessment in Swedish municipality comprehensive planning through a chosen case study. The implementation of a new EGdirective in Swedish law, concerning Assessment of the effects of certain plans and programmes on the environment, should lead to some changes in the way Swedish municipalities' deals with environmental issues in their comprehensive plans. This could later on lead to new preconditions for municipality comprehensive planning. The purpose of this study was to investigate how the planning organisation in the municipality adapts to new regulations for impact assessment of comprehensive plans required by the Planning and Building act. Secondly the purpose was to partly participate in the early stages of the planning process and thereby indicate and identify possible environmental impacts regarding the aspects of land and water. This was done as a case study in a well defined part of the process.

The use of environmental management systems, and objectives-led corporate management have become a widespread phenomenon today. Identification and assessment of an organisation?s significant (environmental) aspects is crucial within this work. Identification and especially assessment of significant aspects is often considered as a problematic step in many organisations. There are no generally accepted methods how to undertake this crucial step.

The demand for environmental assessments on buildings and energy consumption is increasing as well as the energy performance requirements for buildings. At the same time it is increasingly common with self-producers of heat and electricity generation.The main purpose with this master thesis is to investigate how time resolution affects the environmental assessment of energy consumption in office buildings connected to district heating (DH). Environmental assessments were done with both attributional LCA and consequential LCA with system expansion.Fortum´s DH system in Stockholm was analyzed and district heating production was simulated in a Matlab-model. Greenhouse gas (GHG) emissions for the production were calculated. The heat demand of the office Gångaren 16 in Stockholm was simulated in IDA ICE.

AimThe purpose of this study is to examine which tools teachers, teaching physical education, are using for assessment and grading in primary schools.IssuesHow it is perceived by teachers to assess and grade the students? How have the assessment and grading tools been developed?How do the teachers document what they assess and grade?How do the teachers communicate to the students what they assess and grade?MethodThe study has a qualitative approach in which the study design is represented by several semi-structured qualitative interviews. The semi-structured interview guide was authored using the foundations of ramfaktorteorin and an overall hermeneutisk approach. The interviews were then carried out with six physical education and health teachers from the Stockholm area. The interviews were recorded with a voice recorder and transcribed.

This Bachelor's thesis in Environmental Science studies the quality of an index of performance measurement of Swedish municipalities' sustainability governance offered by the environmental magazine Miljöaktuellt. Executed for six consecutive years, this evaluation is arguably the most comprehensive and widely spread local sustainability assessment in Sweden. Contextualizing this quantitative measurement tool in the paradigm of New Public Management, the research questions posed are: 'to what extent does the index employed by Miljöaktuellt correspond to the requirements of a set of quality criteria for sustainability assessment?' and 'is the index appropriate as a measure of, or a goal for, Swedish municipalities' internal sustainability efforts?' Through the perspective of evaluation theory, Miljöaktuellt's index is seen as a performance evaluation, thus categorizing this study as a meta-evaluation. Through a qualitative thematic approach, the index is analyzed using the 8 BellagioSTAMP-principles that were developed as tools for assessing quality of sustainability assessments as themes for the analysis.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.